Thick epoxy coal tar high-duty anticorrosive coating

Thick epoxy coal tar high-duty anticorrosive coating

Product Item : 725-H44-85
Category： Industrial Coatings
A two pack epoxy coal-tar heavy-duty anticorrosive coating and it is characterized by good adhesion and excellent resistance to chemicals, water and corrosion.
TDS INQUIRY EMAIL

Product Description:

- Model:725-H44-85

- A two pack epoxy coal-tar heavy-duty anticorrosive coating and it is characterized by good adhesion and excellent resistance to chemicals, water and corrosion.

- VOC less than 250g/L

Intended Uses:

- For use in PCCP heavy-duty anticorrosion.

- For steel ortidal range zone of concrete stakes heavy-duty anticorrosion.

- For interior wall of steel pipes and concrete of Sewage treatment works, power plants and chemical plants etc. heavy-duty anticorrosion.

Product Information:

Volume Solids:75%±2% Finish/Sheen： Gloss
Typical Film Thickness	500microns dry (667microns wet)
Theoretical Coverage(m2/L)	1.5m²/L at typical film thickness
Mix Ratio: 7:1(volume)9:1(weight)
Method of Application
Airless Spray	Recommended
	Tip size range:0.45-0.68mm
	Output pressure:≥17MPa
Air Spray	Tip size range:2.0-3.0mm
Air Spray	Output pressure:≥0.4MPa
Brush/Roller	For small area only
Thinner	Not recommended. Use only in exceptional circumstances (volume 5%).
Cleaner	HX-501
Induction Period	Not necessary