Welcome to Advanced Polyurea & Polyaspartic Coatings

Aliphatic polyurethane finish-Multicolor

Item No.: 725-S52-60
- A two pack acrylic polyurethane finish giving excellent durability
  and long term recoatability.
- High Volume Solids
- Pass the test of NORSOK M501
- VOC less than 250g/L
Intended Uses
- A tough cosmetic finish
- For use in offshore structure environment,such as petrochemical plants, chemical plants, power  stations, bridges    and industrial buildings
- For marine engineering.
Product Information
Volume Solids:72%±2%                  Finish/Sheen:  Gloss
Typical Film Thickness 80microns dry (111microns wet)
Theoretical Coverage(m2/L) 9m2/L at typical film thickness
Mix Ratio: 7:1(volume)10:1(mass)
Method of Application  
Airless Spray Recommended
Tip size range:0.38-0.53mm
Output pressure:≥17MPa
Air Spray Tip size range:2.0-3.0mm
Output pressure:≥0.4MPa
Brush/Roller For small area only
Thinner Not recommended. Use only in exceptional circumstances (volume 5%).
Cleaner BX-28
Induction Period Not necessary
Drying Information
       -5℃           5℃          25℃          35℃      
Touch Dry  4h 2h 40min 30min
Hard Dry 48h 24h 8h 6h
Pot Life 8h 6h 4h 4h
Overcoating Data
  -5℃ 5℃ 25℃ 35℃
Overcoated by Min Max Min Max Min Max Min Max
725-S52-60 48h Non 24h Non 8h Non 6h Non
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size
Part A: 23kg/17L in 20 L container
Part B: 2.3kg/2.5L in 6 L container
Flash Point
Part A: Greater than 31℃
Part B: Greater than 28℃
Mixed pant: Greater than 31℃
Systems and Compatibility
Consult your sales Representative for the systems best suited for the surfaces to be protected.