Welcome to Advanced Polyurea & Polyaspartic Coatings

Alkyd Finish Coating

Item No.: 725-C43-1
- One-component alkyd finish.
- VOC less than 420g/L.
- Obtain a low spread fireworks certificate from CCS.(IMO FTPC

Intended Uses

- A cosmetic finish, for use in indoor or outdoor.
- For use at a little chemical corrosion part.

Product Information

Volume Solids:50%±3%                  Finish/Sheen:  Gloss
Film Thickness(μm) Min Typical Max
Dryfilm Thickness 30 40 80
Wetfilm Thickness 60 80 160
Theoretical Coverage(m2/L) 16.7 12.5 6.2
Mix Ratio: One pack
Method of Application  
Airless Spray Recommended
Tip size range:0.38-0.48mm
Output pressure:≥15MPa
Air Spray
Tip size range:2.0-3.0mm
Output pressure:≥0.4MPa
Brush/Roller May be used.Brush is used for small area only.
Thinner Not recommended.Use only in exceptional circumstances (volume 5%).
Cleaner CX-101    
Induction Period Not necessary
Drying Information
         5℃           10℃         25℃          35℃    
Touch Dry   5h 3h 1h 1h
Hard Dry 60h 48h 24h 16h
Pot Life Not applicable
Overcoating Data
  5℃ 10℃ 25℃ 35℃
Overcoated by  Min Max Min Max Min Max Min Max
725-C43-1 48h Non 24h Non 16h Non 12h Non
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size: 22kg/18L in 20 L container
Flash Point: Greater than 28℃
Systems and Compatibility:
Consult your sales Representative for the systems best suited for the surfaces to be protected.