Welcome to Advanced Polyurea & Polyaspartic Coatings

Drinking water tank coating-White/Pink

Item No.: 725-H45-02
- A two pack drinking water tank epoxy coatings.
- Approved by Ministry of Health of the state for use in contace
  with potable water.
- VOC less than 300g/L.
Intended Uses
- For use in fresh water pipe.
Product Information
Volume Solids:70%±2%                  Finish/Sheen:  Golss
Film Thickness(μm) Min Typical Max
Dryfilm Thickness 80 125 250
Wetfilm Thickness 111 173 346
Theoretical Coverage(m2/L) 9 5.8 2.9
Mix Ratio:2.1:1(volume)4:1(mass)
Method of Application  
Airless Spray Recommended
Tip size range:0.38-0.53mm
Output pressure:≥17MPa
Air Spray
Tip size range:2.0-3.0mm
Output pressure:≥0.3MPa
Brush/Roller For small area only.
Thinner Not recommended. Use only in exceptional circumstances (volume 5%).
Cleaner HX-501
Induction Period Not necessary
Drying Information
       10℃           25℃           35℃     
Touch Dry  6h 4h 3h
Hard Dry 40h 24h 16h
Pot Life 6h 6h 4h
Overcoating Data
  10℃ 25℃ 35℃
Overcoated by  Min Max Min Max Min Max
725-H45-02 36h 10d 24h 7d   16h 5d
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size
Part A: 24 kg/13.5L in 20 L container
Part B: 6kg/6.5L in 6 L container
Flash Point
Part A: Greater than 31℃
Part B: Greater than 29℃
Mixed paint: Greater than 31℃
Systems and Compatibility
Consult your sales Representative for the systems best suited for the surfaces to be protected.