Welcome to Advanced Polyurea & Polyaspartic Coatings
icon

Epoxy efficient conductive coating-Black

Item No.: 725-H58-01
- A two pack epoxy coating
- Have good performance of conducuting
- VOC less than 180g/L
Description
Intended Uses
- For use in interior wall of oil tank and steel pipes anti static anti corrosive, etc.
Product Information
Volume Solids:80%±2%                  Finish/Sheen:  Gloss
Typical Film Thickness 150microns dry (188microns wet)
Theoretical Coverage(m2/L) 5.7m2/L at typical film thickness
Mix Ratio: 4:1(volume)5:1 (mass)
Method of Application  
Airless Spray Recommended
Tip size range:0.38-0.53mm
Output pressure:≥17MPa
Air Spray Tip size range:2.0-3.0mm
Output pressure:≥0.4MPa
Brush/Roller For small area only
Thinner Not recommended.Use only in exceptional circumstances (volume 5%).
Cleaner HX-501
Induction Period Not necessary
Drying Information
        5℃           25℃           35℃    
Touch Dry  4h 2h 1h
Hard Dry 24h 20h 16h
Pot Life 4h 2h 1h
Overcoating Data
  5℃ 25℃ 35℃
Overcoated by Min Max Min Max Min Max
725-H58-01 24h 10d 20h 7d 16h 5d
Storage
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size
Part A: 22kg/16L in 20L container
Part B: 4kg/4L in 6L container
Flash Point
Part A: Greater than 31℃
Part B: Greater than 28℃
Mixed pant: Greater than 31℃
Systems and Compatibility
Consult your sales Representative for the systems best suited for the surfaces to be protected.