Welcome to Advanced Polyurea & Polyaspartic Coatings

Epoxy floor finish

Item No.: 725-H42-31
- A two pack,good chemical and abrasion resistance.
- Good compression and impact resistance.
- VOC less than 400g/L.
Intended Uses
- A tough cosmetic finish.
- For use in cement and concrete surface protection and decoration.
Product Information
Volume Solids:53%±2%                  Finish/Sheen:  Gloss
Film Thickness(μm) Min Typical Max
Dryfilm Thickness 30 40 80
Wetfilm Thickness 57 75 150
Theoretical Coverage(m2/L) 17.7 13.3 6.6
Mix Ratio:2.3:1(volume)4:1(weight)
Method of Application  
Airless Spray Recommended
Tip size range:0.38-0.53mm
Output pressure:≥15MPa
Air Spray
Tip size range:2.0-3.0mm
Output pressure:≥0.4MPa
Brush/Roller For small area only.
Thinner Not recommended.Use only in exceptional circumstances (volume 5%).
Cleaner HX-501
Induction Period 5℃ 15℃ 25℃ 35℃
40min 30min 20min 10min
Drying Information
         5℃          15℃         25℃          35℃     
Touch Dry    10h 6h 2h 30min
Hard Dry 48h 24h 16h 12h
Pot Life 8h 6h 4h 3h
Overcoating Data
  5℃ 15℃ 25℃ 35℃
Overcoated by  Min Max Min Max Min Max Min Max
725-H42-31 24h 14d 20h 10d   16h 7d 12h 5d
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size
Part A: 22.8kg/14L in 20 L container
Part B: 5.7kg/6L in 6L container
Flash Point
Part A: Greater than 31℃
Part B: Greater than 31℃
Mixed paint: Greater than 31℃
Systems and Compatibility
Consult sales Sunrui Representative for the systems best suited for the surfaces to be protected.