Welcome to Advanced Polyurea & Polyaspartic Coatings

Epoxy glass flake paint-Grey

Item No.: 725-H53-44
- A two pack epoxy glass flake anticorrosive coating.
- Have good performance of wear resistant and corrosion resistant.
- VOC less than 290g/L.
Intended Uses
- For use on steelwork surface of petrochemical plants.
Product Information
Volume Solids:75%±2%                  Finish/Sheen:  Matt
Typical Film Thickness 125microns dry (167microns wet)
Theoretical Coverage(m2/L) 6.0m2/L at typical film thickness
Mix Ratio: 3:1(volume)4.5:1(weight)
Method of Application  
Airless Spray Recommended
  Tip size range:0.38-0.53mm
  Output pressure:≥17MPa
Air Spray Tip size range:2.0-3.0mm
  Output pressure:≥0.4MPa
Brush/Roller For small area only
Thinner Not recommended. Use HX-501 only in exceptional circumstances (volume 5%)
Cleaner HX-501
Induction Period 5℃ 15℃ 25℃ 35℃
30min 20min 10min 0min
Drying Information
       5℃            15℃         25℃           35℃     
Touch Dry  2h 1h 40min 30min
Hard Dry 36h 24h 16h 12h
Pot Life 8h 6h 1h 3h
Overcoating Data
  Substrate Temperature
  5℃ 15℃ 25℃ 35℃
Overcoated by  Min Max Min Max Min Max Min Max
725-H53-44 36h 14d 24h 10d 16h 7d 12h 5d
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size
Part A: 23kg/15L in 20L container
Part B: 5.1kg/5L in 6L container
Flash Point
Part A: Greater than 31℃
Part B: Greater than 31℃
Mixed pant: Greater than 31℃
Systems and Compatibility
Consult your sales Representative for the systems best suited for the surfaces to be protected.