Welcome to Advanced Polyurea & Polyaspartic Coatings
icon

Epoxy primer

Item No.: EP1304
The main design is applied to the concrete substrate, which plays the role of good penetration, sealing pores and strengthening cement.
Description
Composition A two-component coating consisting of E51 epoxy resin and modified polyamide and aromatic amine curing agents.
Curing method Normal temperature curing, 10-35 ℃.
Application High permeability primer for cement substrate.
Features It has good sealing and permeability, and plays a good role in reinforcing and sealing the concrete base.
Package Main agent 20kg curing agent 10kg, ratio 1:1.
Range of use The main design is applied to the concrete substrate, which plays the role of good penetration, sealing pores and strengthening cement.
Material base data(25℃,60%RH)        
                     Main Agent Curing Agent
Appearance Colorless transparent liquid Light Yellow transparent liquid
Smell Slightly stimulating odor Pungent amine odor
Chemical components Epoxy series Modified aromatic amine
Viscosity25℃ 400MPa 80MPaS
Proportion25℃ 1.01 0.98
Solid content 95%    65%
Mixed material Data(25℃,60%RH)                    
Viscosity of mixed25℃: 150MPaS
Mixing proportion25℃ :1.01
Potlife20℃: 50min                            
Dry time: 6hr
Hard drying time: 20hr
Recoatable time:6hr
Operation time and temperature relation
      10℃            20℃           30℃     
      2hr      60min      40min
Material physical properties after curing
Adhesion with epoxy primer 3MPa
Alkali resistant 20% sodium hydroxide No blistering, no discoloration
Attention
Construction prohibited when humidity is greater than 90%RH;
Ensure that the concrete reaches the maintenance standard and the moisture content is lower than 8% before
construction carried out;
The concrete foundation must be polished and cleaned thoroughly before construction carried out;
The reaction is very fast, After stirring, all must be poured on the ground to prevent the heat from melting in the
bucket.
User's guidance
Mix the two ingredients strictly in proportion and stir well; short-stem roller or Trowel construction;
Coating amount controlled by 0.1-0.15kg/m2.
Storage/Shelf Life:Ideal storage condition is 10-35℃in cool and dry place, avoid direct sunlight. / One year