Welcome to Advanced Polyurea & Polyaspartic Coatings
icon

Epoxy sealing coating

Item No.: 725-H06-01
- A transparent epoxy sealing coating with excellent penetration
  properties.
- VOC less than 420g/L.
Description
Intended Uses
- For prepared concrete substrates.
- For seal off the hole of floor.
Product Information
Volume Solids:50%±2%                  Finish/Sheen:  Matt
Film Thickness(μm) Min Typical Max
Dryfilm Thickness 40 50 80
Wetfilm Thickness 80 100 160
Theoretical Coverage(m2/L) 12.5 10 6.4
Mix Ratio:2:1(volume)2:1(weight)
Method of Application  
Airless Spray Recommended
Tip size range:0.38-0.53mm
Output pressure:≥15MPa
Air Spray
 
Tip size range:1.5-2.0mm
Output pressure:≥0.4MPa
Brush/Roller For small area only.
Thinner Not recommended. Use only in exceptional circumstances (volume 5%).
Cleaner HX-501
Induction Period 10℃ 25℃ 35℃
20min 10min 5min
Drying Information
       10℃          25℃            35℃      
Touch Dry 2.5h 2h 1h
Hard Dry 24h 16h 12h
Pot Life 6h 4h 3h
Overcoating Data
  10℃ 25℃ 35℃
Overcoated by Min Max Min Max Min Max
725-H45-ZF101G 20h 10d 16h 7d   12h 5d
725-H42-31 20h 10d 16h 7d   12h 5d
Storage
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size
Part A: 13kg/13L in 20 L container
Part B: 6.5kg/7L in 9.25L container
Flash Point
Part A: Greater than 31℃
Part B: Greater than 31℃
Mixed paint: Greater than 31℃
Systems and Compatibility
Consult your sales Representative for the systems best suited for the surfaces to be protected.