Welcome to Advanced Polyurea & Polyaspartic Coatings

Epoxy sealing paint

Item No.: 725-H42-29
A transparent epoxy sealing coating with excellent penetration properties,VOC less than 420g/L.
Intended Uses
- For prepared concrete substrates.
- For seal off the hole of floor.
Product Information
Volume Solids:50%±2%                  Finish/Sheen:  Matt
Typical Film Thickness 50microns dry (100microns wet)
Theoretical Coverage(m2/L) 10m2/L at typical film thickness
Mix Ratio: 2:1(volume)2:1(weight)
Method of Application  
Airless Spray Recommended
Tip size range:0.33-0.53mm
Output pressure:≥15MPa
Air Spray
Tip size range:2.0-3.0mm
Output pressure:≥0.4MPa
Brush/Roller For small area only
Thinner Not recommended.Use only in exceptional circumstances (volume 5%).
Cleaner HX-501
Induction Period 10℃ 25℃ 35℃  
20min 10min 5min  
Drying Information
        10℃           25℃            35℃      
Touch Dry   2.5h 2h 1h
Hard Dry 24h 16h 12h
Pot Life 6h 4h 3h
Overcoating Data
  10℃ 25℃ 35℃
Overcoated by Min Max Min Max Min Max
725-H45-ZF101G  20h 10d 16h 7d 12h 5d
725-H42-31 20h 10d 16h 7d 12h 5d
Store in cool and dry conditions. Well ventilate. Keep away from hot and fire. Shelf Life: 12 months minimum at 25℃. Subject to re-inspection thereafter.
Pack Size: Part A : 13kg/13L in 20 L container;Part B: 6.5kg/7L in 6L container
Flash Point
Part A: Greater than 31℃
Part B: Greater than 31℃
Mixed pant: Greater than 31℃
Systems and Compatibility
Consult your sales Representative for the systems best suited for the surfaces to be protected.