Welcome to Advanced Polyurea & Polyaspartic Coatings

Epoxy zinc yellow primer

Item No.: 725-H06-19
- A two pack epoxy primer contains zinc yellow anti-corrosive
- VOC less than 300g/L.
Intended Uses
- For use at aluminum alloy.
- For use in all atmosphere areas.
Product Information
Volume Solids:65%±2%                  Finish/Sheen:  Matt
Film Thickness(μm) Min Typical Max
Dryfilm Thickness 50 50 100
Wetfilm Thickness 77 77 154
Theoretical Coverage(m2/L) 13 13 6.5
Mix Ratio:3:1(volume)5:1(mass)
Method of Application  
Airless Spray Recommended
Tip size range:0.38-0.53mm
Output pressure:≥17MPa
Air Spray
Tip size range:2.0-3.0mm
Output pressure:≥0.4MPa
Brush/Roller For small area only.
Thinner Not recommended. Use only in exceptional circumstances (volume 5%).
Cleaner HX-501
Induction Period 10℃ 25℃ 35℃
60min 20min 10min
Drying Information 
      10℃          25℃          35℃     
Touch Dry 6h 4h 3h
Hard Dry 48h 24h 20h
Pot Life 6h 4h 2h
Overcoating Data
  10℃ 25℃ 35℃
Overcoated by Min  Max Min  Max Min  Max
725-H06-19 36h 14d 20h  7d   16h  5d
725-H53-81 36h 14d 20h  7d   16h  5d
725-BS43-91 48h 24h 20h
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size
Part A: 23.5kg/15L in 20 L container
Part B: 4.7kg/5L in 6L container
Flash Point
Part A: Greater than 31℃
Part B: Greater than 29℃
Mixed paint: Greater than 31℃
Systems and Compatibility
Consult your sales Representative for the systems best suited for the surfaces to be protected.