Welcome to Advanced Polyurea & Polyaspartic Coatings

Organo silicone high-temperature resistant paint

Item No.: 725-W61-22
- One pack, dry at room or higher temperature
- On surface likely to reach up to 300~600℃
- VOC less than 535g/L
Intended Uses
- For use at all kinds of high temperature equipment
- For use petroleum pipeline or oven.
roduct Information
Volume Solids:40%±2%                  Finish/Sheen:  Gloss
Typical Film Thickness 30microns dry (75microns wet)
Theoretical Coverage(m2/L) 13.3m2/L at typical film thickness
Mix Ratio: one pack
Method of Application  
Airless Spray Recommended
Tip size range:0.38-0.53mm
Output pressure:≥17MPa
Air Spray Tip size range:2.0-3.0mm
Output pressure:≥0.4MPa
Brush/Roller For small area only
Thinner Not recommended. Use only in exceptional circumstances (volume 5%).
Cleaner JX-601
Induction Period Not necessary
Drying Information
      10℃          25℃            35℃     
Touch Dry  1h 30min 20min
Hard Dry 8h 6h 3h
Pot Life Not applicable
Overcoating Data
  5℃ 25℃ 35℃
Overcoated by Min Max Min Max Min Max
725-W61-22 8h  Non 6h  Non 3h  Non
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size: 21.6kg/18L in 20L container
Flash Point: Greater than 28℃
Systems and Compatibility
Consult your sales Representative for the systems best suited for the surfaces to be protected.