Welcome to Advanced Polyurea & Polyaspartic Coatings

Pipeline Special Anti-Corrosion Polyurea Coating

Item No.: PS700A
Inside and outside coating for various pipeline.Waterproof and anticorrosive coatings for sea structures, ice storage tank, water storage tank and drinking water tank.
PS700A is designed specifically for pipeline. with high crosslinking density and certain elasticity, more than 30% elongation at break, dense coating and low water absorption . PS700A is the state of the art 100% solids, ultra fast cure, flexible, spray-applied, high build, and two components aromatic pure polyurea elastomer. The system consists of A component, a quasi-prepolymer rich of free NCO, and B component, a mixture of polyetheramines, amine extenders and other additives. PS700A is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. It is the optimum choice where a tough, flexible, impact resistant, abrasion resistant, heavy-duty, anti-corrosion coating system which exhibits extraordinary performance characteristics. High performance of resistance to acid,alkali,salt,sulfide. No bubbles and peeling when long term immersion in liquid. Weather resistant,no powdering and cracking when enduring the impact of cold and hot weather.
   1. Without any thinner, environmental protection,high performance of resistance to acid,alkali,salt,sulfide
   2. Elongation, high flexibility, can adapt to the basic cracks and slight deformation;
   3. Good aging resistance, Excellent mechanical and chemical properties
   4. Fast-set, can be sprayed on any surface, slope, vertical surface;
   5. Convenient construction, spraying a film.
   6. Working by machine 
Volume solid content 100%
Hardness(shore A) 65-75
Density 1.02g/cm3
Elongation ≥300%
Tensile strength 24MPa
Impact strength  ≥60N/mm
Water impermeability 0.4MPa,60min
Wear resistance (750g,500r)  10mg
Impact resistance 1.5kg.m
Electric strength 15kv/mm
Temperature variation -35------+120°C
Heating temperature 60-70°C
Gel time(sec) 7-15
Tack free time(sec) 30-50
Water resistance(30d) no rust no bubbles no peel
Acid resistance (10%H2SO4 or 10%HCI, 30d) no rust no bubbles no peel
Alkali resistance 10%NaOH, 30d  no rust no bubbles no peel
Salt resistance 60g/L, 30d no rust no bubbles no peel
Salt spray resistance (2000h) no rust no bubbles no peel
Oil resistance 0# diesel crude oil 30d   no rust no bubbles no peel
Flash point 200°C
Petrochemical tank ,natural gas,municipal,urban drainages, tower,tank-washer,pipeline ,sewage pool.