Welcome to Advanced Polyurea & Polyaspartic Coatings
icon

Polyaspartic weather resistance elastic waterproof coating

Item No.: PS9500
Waterproofing and corrosion protection for concrete substrates (basements, bridges, roofs, warehouses, etc.)
Description
PS9500 is consist of Polyaspartic esters and variety of pigment, filler,additive and solvent. All main ingredients are manufactured by own.
Characteristic
■ Excellent weathering resistance,non-yellowing in 20 years
■ Great adhesion with matched polyurea primer 
■ Excellent elongation at break
■ Excellent waterproofing and decorative function
Designed for use:Waterproofing and corrosion protection for concrete substrates (basements, bridges, roofs, warehouses, etc.)
Physical Parameters
Color: colorless or according to customers’ requirement.
Weight Solid :≥60%
Flash point:  30±2℃
Viscosity:     800±200CPS(25℃)
Proportion:  1.07g/cm3
Luster: Semi-light or bright
Coating thickness(μm): Dry Film:200-300   Wet film:270-550
Theoretical coating rate:Theoretical value:5.6㎡/Kg/100μm
Actual value: varies according to various factors such as surface treatment, external environment, construction method, etc.
Main Technical indicators of Coating Film :
Elongation:≧300%                                    test method:GB/T 16777-2008
Tensile Strength:≧4MPa                           test method:GB/T 16777-2008
Adhesion (concrete):≧4MPa                    test method:GB/T 5210-2006
Abrasive resistance(750g/500r):≦40        test method:GB/T 1768-2006
Construction parameters
Ratio: 
Airless spray:Main paint: curing agent: thinner=1:1
Brush and Roll coating:Main paint: curing agent:=1:1
Coating available time: 
Temperature(℃)     5          10       20        25    
Mixing(hrs) 4 3 2.5 2
Construction conditions: -15 ℃ ---30 ℃, humidity: ≤ 85%
Substrate temperature: must be greater than the air dew point temperature above 3 ℃        
Construction method
Airless spraying, air spraying, brushing and scratch
Airless spray (two-component) (Recommended Use)
Nozzle Size 0.19-0.23
Outlet pressure 100-120kg.cm3
Cleaning agent / thinner: Polyurea standard thinner
Note: If you use airless spray or brush, roller coating, please consult our engineers before use.
Drying time and interval:
Temperature     -5           5        10          20         30     
Touch dry(hrs) 4 3 2 1.5 1
Hard dry(hrs) 24 12 8 6 4
Painting interval(hrs) 24 12 8 6 4
The above data are for guidance only. Actual drying time / time interval before coating can be long or short, depending on film thickness, ventilation, humidity, lower paint, preloading requirements and mechanical strength.
Painting matching
Applicable:polyurea supporting primer, polyurea middle coating, or refer to our recommended package
Surface treatment
1,Rinse with salt water and other water-soluble dirt
2,Remove grease with a suitable detergent and degreaser
3,Make sure the surface is clean and dry before construction
4,Note the distance between the coating and the primer
store
Storage time: Paint: 1 year Curing agent: 1 year
Storage temperature: 0 ℃ -30 ℃
Packing:Paint: 20KG  curing agent: 20KG