Welcome to Advanced Polyurea & Polyaspartic Coatings
icon

Quick-drying polyaspartic anti-corrosion topcoat –Black

Item No.: DT-113
Composed of polyaspartic polyurea resin and anticorrosive pigments and fillers , additives. High Solid, Rapid‐Drying coating, with excellent adhesion to polyaspartic polyurea primer. Can normally curing in ‐10℃. No baking, save energy consumption.
Description
High Solid, Rapid‐Drying coating, with excellent adhesion to polyaspartic polyurea primer. Can normally curing in ‐10℃. No baking, save energy consumption. Apply vocs 250 g / L and meets the green coating standard.
Recommended uses
Particularly recommended for assembly line painting of construction machinery.
Not Recommended
Isocyanate of polyaspartic polyurea is sensitive to water and moisture, which will lead to shorten of pot life.
Chemical Resistance Guide
  Immersion   Splash &Spillage       Fumes
Acids   Good       Good Excellent
Alkalie   Good                    Good Excellent
Solvents    Fair    Excellent Excellent
Salt water   Good    Excellent Excellent
Fresh water   Good    Excellent Excellent
Temperature Resistance
Temperature      Continuous      Non-Continuous
Dry 60ºC             70ºC
Submerge 40ºC             55ºC
Weathering:Good
Substrates
polyaspartic polyurea primer as recommended. Good compatibility with epoxy and acrylic polyurethane system.
Topcoat Required
Topcoat is not required.
Solids Content:80± 2% by volume
  Filmthickness     per coat(μm)     Theoretical coverage(m²/L)
         Dry  Wet  
1      30‐60 38‐75       26.7‐13.3
2        40   50           20
  • Recommended DFT
  • Standard
Colors:Black.
Gloss:Semi‐Gloss