Welcome to Advanced Polyurea & Polyaspartic Coatings
icon

Quick-drying polyaspartic anti-corrosion topcoat-Yellow

Item No.: DT-112
Composed of polyaspartic polyurea resin and anticorrosive pigments and fillers , additives. High Solid, Rapid‐Drying coating, with excellent adhesion to polyaspartic polyurea primer. Can normally curing in ‐10℃. No baking, save energy consumption.
Description
High Solid, Rapid‐Drying coating, with excellent adhesion to polyaspartic polyurea primer. Can normally curing in ‐10℃. No baking, save energy consumption. Apply vocs 250 g / L and meets the green coating standard.
Recommended uses
Particularly recommended for assembly line painting of construction machinery.
Not Recommended
Isocyanate of polyaspartic polyurea is sensitive to water and moisture, which will lead to shorten of pot life.
Chemical Resistance Guide
  Immersion       Splash &Spillage      Fumes
Acids    Good             Good    Excellent
Alkalie    Good             Good    Excellent
Solvents     Fair           Excellent    Excellent
Salt water    Good           Excellent    Excellent
Fresh water    Good           Excellent    Excellent
Temperature Resistance
Temperature      Continuous     Non-Continuous
Dry          60ºC           70ºC
Submerge         40ºC           55ºC
Weathering:Good
Substrates
polyaspartic polyurea primer as recommended. Good compatibility with epoxy and acrylic polyurethane system.
Topcoat Required
Topcoat is not required.
Solids Content:80± 2% by volume
  Filmthickness    per coat(μm)    Theoretical coverage(m²/L)
       Dry                Wet  
1    30‐60              38‐75            26.7‐13.3
2       40                50                20
  • Recommended DFT
  • Standard
Colors:Yellow
Gloss:Glossy