Welcome to Advanced Polyurea & Polyaspartic Coatings
icon

Quick-drying Polyaspartic Anti-corrosive Primer

Item No.: DT-111
This is quick-drying polyaspartic anti-corrosion primer. High Solid, Rapid‐Drying coating, with excellent adhesion to sand blasting steel.Can normally curing in ‐10℃. No baking, save energy consumption.
Description
Composed of polyaspartic polyurea resin and anti-corrosive pigments and fillers , additives. High Solid, Rapid‐Drying coating, with excellent adhesion to sand blasting steel.Can normally curing in ‐10℃. No baking, save energy consumption. Apply vocs 250 g / L and meets the green coating standard.
Recommended uses
Particularly recommended for assembly line painting of construction machinery.
Not Recommended
Isocyanate of polyaspartic polyurea is sensitive to water and moisture, which will lead to shorten of pot life.
Chemical Resistance Guide
  Immersion Splash &Spillage Fumes
Acids Good Good Excellent
Alkalie Good Good Excellent
Solvents Fair Excellent Excellent
Salt water Good Excellent Excellent
Fresh water Good Excellent Excellent
Temperature Resistance  
Temperature    Continuous    Non-Continuous
Dry    60ºC        70ºC
Submerge    40ºC        55ºC
Weathering
Topcoat is required
Substrates
Blasted Steel as recommended. Good compatibility with epoxy and acrylic polyurethane system.
Topcoat Required
Topcoat is required
Solids Content:80± 2% by volume
  Filmthickness     per coat(μm)     Theoretical coverage(m²/L)
       Dry                 Wet  
1    50‐100              63‐125                16‐8
2      80                100                  10
  • Recommended DFT
  • Standard
Colors:Grey
Gloss:Semi‐Gloss