Welcome to Advanced Polyurea & Polyaspartic Coatings

Solvent-free epoxy anticorrosive coating

Item No.: 725-H53-105
- A two pack free solvent epoxy coal-tar heavy-duty anticorrosive
  coating and it is characterized by good adhesion and excellent
  resistance to chemicals, water and corrosion.
- VOC less than 50g/L.
Intended Uses
- For inner and outside of concrete pipe heavy-duty anticorrosion.
Product Information
Volume Solids:95%±2%                   Finish/Sheen:  Gloss
Film Thickness(μm) Min Typical Max
Dryfilm Thickness 200 900 1100
Wetfilm Thickness 200 950 1100
Theoretical Coverage(m2/L) 4.7 10.5 0.86
Mix Ratio: 1:1(volume)1:1(weight)
Method of Application  
Airless Spray Recommended Preheat 40℃-70℃
Tip size range:0.53-0.89mm
Output pressure:≥22MPa
Air Spray  Not recommended
Brush/Roller For small area only
Thinner Not recommended. Use only in exceptional circumstances (volume 5%).
Cleaner HX-501
Induction Period Not necessary
Drying Information
       -5℃          5℃            25℃          35℃      
Touch Dry 6h 4h 2h 1.5min
Hard Dry 24h 20h 8h 6h
Pot Life 2h 1h 30min 20min
Overcoating Data
  Substrate Temperature
  -5℃  5℃ 25℃ 35℃
Overcoated by Min Max Min Max Min Max Min Max
725-H53-105 24h 14d 20h 10d 8h 7d 6h 5d
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size:
Part A: 27kg/18L in 20 L container
Part B: 27kg/18L in 20L container
Flash Point
Part A: Greater than 31℃
Part B: Greater than 31℃
Mixed pant: Greater than 31℃
Systems and Compatibility
Consult your sales Representative for the systems best suited for the surfaces to be protected.