Welcome to Advanced Polyurea & Polyaspartic Coatings
icon

Thick epoxy coal tar high-duty anticorrosive coating

Item No.: 725-H44-85
- A two pack epoxy coal-tar heavy-duty anti corrosive coating and
  it is characterized by good adhesion and excellent resistance to
  chemicals, water and corrosion.
- VOC less than 250g/L
Description
Intended Uses
- For use in PCCP heavy-duty anticorrosion.
- For steel ortidal range zone of concrete stakes heavy-duty anticorrosion.
- For interior wall of steel pipes and concrete of Sewage treatment works, power plants and chemical plants etc. 
Product Information
Volume Solids:75%±2%                  Finish/Sheen:  Gloss
Typical Film Thickness 500microns dry (667microns wet)
Theoretical Coverage(m2/L) 1.5m2/L at typical film thickness
Mix Ratio: 7:1(volume)9:1(weight)
Method of Application  
Airless Spray Recommended
Tip size range:0.45-0.68mm
Output pressure:≥17MPa
Air Spray
 
Tip size range:2.0-3.0mm
Output pressure:≥0.4MPa
Brush/Roller For small area only
Thinner Not recommended. Use only in exceptional circumstances (volume 5%).
Cleaner HX-501
Induction Period Not necessary
Drying Information
       -5℃          5℃           25℃         35℃     
Touch Dry   4h 2h 1h 45min
Hard Dry 48h 36h 20h 10h
Pot Life 4h 2h 1h 40min
Overcoating Data
  -5℃ 5℃ 25℃ 35℃
Overcoated by  Min Max Min Max Min Max Min Max
725-H44-85 48h 14d 36h 10d 20h 7d 10h 5d
Storage
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size
Part A: 22.5kg/18L in 20 L container
Part B: 27kg/18L in 20L container
Flash Point
Part A: Greater than 31℃
Part B: Greater than 31℃
Mixed pant: Greater than 31℃
Systems and Compatibility
Consult your sales Representative for the systems best suited for the surfaces to be protected.