Welcome to Advanced Polyurea & Polyaspartic Coatings
icon

Wet-surface epoxy sealing coating

Item No.: 725-H06-10
- A transparent epoxy surface sealer with good penetration
  properties.
- It can tolerate wet surface.
- VOC less than 200g/L.
Description
Intended Uses
- For prepared wet concrete substrates.
- For use on concrete surface of offshore facilities.
Product Information
Volume Solids:95%±2%                  Finish/Sheen:  Matt
Typical Film Thickness 50microns dry (52microns wet)
Theoretical Coverage(m2/L) 1.9m2/L at typical film thickness
Mix Ratio: 2.6:1(volume)2.8:1(weight)
Method of Application  
Airless Spray Recommended
Tip size range:0.38-0.53mm
Output pressure:≥15MPa
Air Spray
 
Tip size range:2.0-3.0mm
Output pressure:≥0.4MPa
Brush/Roller For small area only
Thinner Not recommended.Use only in exceptional circumstances (volume 5%)
Cleaner HX-501
Induction Period Not necessary
Drying Information
       15℃            25℃           35℃      
Touch Dry 2h 1.5h 45min
Hard Dry 24h 16h 12h
Pot Life 1.5h 1h 30min
Overcoating Data
  15℃ 25℃ 35℃
Overcoated by Min Max Min Max Min Max
725-H45-ZF101 20h 10d 16h 7d 12h 5d
725-H45-ZF101G 20h 10d 16h 7d 12h 5d
725-H53-38 20h 10d 16h 7d 12h 5d
Storage
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25 ℃,Subject to re-inspection thereafter.
Pack Size
Part A: 15.1kg/20L in 20L container
Part B: 5.3kg/5.5L in 6L container
Flash Point
Part A: Greater than 31℃
Part B: Greater than 31℃
Mixed pant: Greater than 31℃
Systems and Compatibility
Consult your sales Representative for the systems best suited for the surfaces to be protected.