Epoxy zinc powder primer

Product Item : 725-H06-30
Category： Industrial Coatings
A quick dry two pack epoxy primer obtaining zinc powder.
TDS INQUIRY EMAIL

Product Description:

- Model:725-H06-30

- A quick dry two pack epoxy primer obtaining zinc powder.The content of zinc in the dry film is more than 30%. The product has good antirust and mechanical properties.

- VOC less than 420g/L.

Intended Uses:

- For use in all above water areas.

- Protection of steel structure for petrochemical plant, chemical plant, paper mill and bridge.

Product Information:

Volume Solids:60%±2% Finish/Sheen： Matt
Typical Film Thickness	50microns dry (83.3microns wet)
Theoretical Coverage(m2/L)	12m²/L at typical film thickness
Mix Ratio: 3.3:1(volume)10:1(weight)
Method of Application
Airless Spray	Recommended
	Tip size range:0.33-0.53mm
	Output pressure:≥15MPa
Air Spray	Tip size range:2.0-3.0mm
	Output pressure:≥0.4MPa
Brush/Roller	For small area only
Thinner	Not recommended.Use only in exceptional circumstances (volume 5%).
Cleaner	HX-501
Induction Period	5℃	15℃	25℃	35℃
	30min	20min	10min	0min

Drying Information:

	5℃	15℃	25℃	35℃
Touch Dry	2h	1h	40min	30min
Hard Dry	36h	24h	16h	12h
Pot Life	8h	6h	4h	3h

Overcoating Data:

	5℃	15℃	25℃	35℃
Overcoated by	Min Max	Min Max	Min Max	Min Max
725-H06-21	24h 14d	20h 10d	16h 7d	12h 5d
725-H53-81	24h 14d	20h 10d	16h 7d	12h 5d
725-H42-30	---	20h 10d	16h 7d	12h 5d