Epoxy High Build Anticorrosive Coating

Product Item : 725-H52-77
Category： Industrial Coatings
This is a two-component high build polyamide adduct cured universal epoxy paint.
TDS INQUIRY EMAIL

Product Description:

- Model:725-H52-77

- This is a two-component high build polyamide adduct cured universal epoxy paint.

- Excellent anticorrosive and very good mechanical properties.

- Short drying time and applying at low temperature.

- Excellent adhesion on low roughness substrate.

- VOC less than 250g/L.

Intended Uses:

- As high performance coating for offshore structures, petrochemical plants, paper mills and bridges.

- Intended for fast cure and for in-shop applications where fast recoating and handling is required.

Product Information:

Volume Solids:75%±2% Finish/Sheen： Gloss
Typical Film Thickness	125microns dry (166microns wet)
Theoretical Coverage(m2/L)	6.0m²/L at typical film thickness
Mix Ratio: 3.4:1（volume）6:1(mass)
Method of Application
Airless Spray	Recommended
	Tip size range:0.45-0.68mm
	Output pressure:≥17MPa
Air Spray	Not recommended
Brush/Roller	For small area only
Thinner	Not recommended.Use only in exceptional circumstances (volume 5%).
Cleaner	HX-501
Induction Period	-10℃	5℃	10℃
	30min	15min	10min

Drying Information:

Overcoating Data: