Non-Solvent polyaspartic elastic waterproof repair varnish

Product introduction：HA8810 is a high-performance, elastic waterproof repair varnish developed with advanced polyaspartic ester technology. Formulated through the scientific blending of specialized polyaspartic ester resins, selected pigments, fillers, additives, and an isocyanate curing agent, it creates an environmentally friendly, odor-free, tough, and highly flexible protective coating. Specifically designed to address water seepage issues on tile surfaces in kitchens and bathrooms, it provides a rapid, efficient, and long-lasting waterproofing repair solution.

Characteristic:

■ Environmentally friendly, odorless

■ Good adhesion to tiles

■ Excellent elongation and Tensile strength

■ Simple construction and quick drying

Application： Mainly used for waterproofing kitchen and bathroom tile surfaces

Product Specification：

Color： Colorless and transparent

Solid content ：≥95%

Flash point(℃)：Part A：128  Part B：112

Viscosity： 200-500CPS (25℃,A,B components combined）

Density： 1.15±0.02g/cm³

Gloss： Bright light

Film thickness(μm)： Flat Dry：200－300 Wet：200－300

Façade Dry：100－150 Wet：100－150

Theoretical coverage：9.3㎡/Kg/100μm

Actual value：Related to surface treatment, external environment，application method and other factors.

Item	Test standard	Result
Elongation	GB/T 16777-2008	≥100%
Tensile Strength（400-600μm）	GB/T 16777-2008	≥10MPa
Tear strength(N/mm)	GB/T 529-2008	≥60
Adhesion (Tile)	GB/T 5210-2006	≥10MPa
Abrasive resistance(750g/500r)	GB/T 1768-2006	≤25mg

Application paramether：
ratio：
Brush/Roller：B：A＝2：1（by weight, please stir well before use）
Pot life：

Temperature(℃）	5	10	20	30
Pot life(min)	40~50	30~40	20~30	15~20

Condition：

Environment temperature： 5℃---30℃， Environment moisture：≤75%（RH）

Substrate temperature： 3℃ higher than air dew pint

Construction method：Brush/Roller (Recommend)

Cleaning agent：Standard Polyaspartic thinner

Drying time：

Temperature(℃）	5	10	20	30
Touch dry(hrs)	3	2.5	2	1.5
Hard dry (hrs)	12	10	7	6

The above data are for guidance only. Actual drying time can be long or short, depending on the film thickness, ventilation, ambient temperature and so on.

Surface treatment：

l Clean the tile residue with a rag

l Pour a proper amount of putty powder or other powder on the surface of tile, and then use rags or emery cloth to force the powder repeatedly to remove polishing wax and stains on the tile surface

l Clean the powder and moisture on the surface of the tile

Storage：

Shelf life： Component B：1 year  Component A：1 year

Storage temperature： 0℃－30℃

package：

Component B：1KG or 20 KG Component A：0.5KG or 10KG