Transparent Polyaspartic Polyurea Waterproof Coating

Product introduction：PS506 is a two-component, transparent polyurea waterproof coating. As a high-solids, dual-formula system based primarily on polyaspartic ester, it provides high transparency, excellent weather resistance, and outstanding waterproofing and anti-corrosion performance. It exhibits strong adhesion to various substrates including concrete, tiles, glass, wood, and metal. Specially designed for waterproofing over tiled surfaces, this coating can be applied directly onto tiles and is suitable for kitchens, bathrooms, balconies, exterior walls, and other areas requiring reliable waterproof protection.

Characteristic：

1. Strong adhesion to various substrates including concrete, tile, glass, wood, and metal.

2. Combines moderate hardness and flexibility to seal existing and future micro-cracks.

3. Excellent sealing properties to block moisture penetration.

4. Weather-resistant for long-term outdoor use.

5. Easy application by brush, roller, or spray.

6. excellent wear and slip resistance.

Application: Can be painted directly on the surface of tiles, suitable for kitchen and bathroom, balcony, external wall and other parts of the waterproofing use

Product Specification：

Color：Colorless to light yellow clear liquid

Solid content：≥95%

Density：1.1±0.05g/cm³

Gloss： Glossy

Film thickness(μm)：Dry：200－300    Wet：250－375

Theoretical coverage：0.15kg/100μm/㎡

Actual value：Related to surface treatment, external environment，application method and other factors.

Item	Test standard	Result
Elongation	GB/T 16777-2008	≥290%
Tensile Strength	GB/T 16777-2008	≥18MPa
Tear strength(N/mm)	GB/T 529-2008	≥60
Adhesion (concrete)	GB/T 5210-2006	≥3MPa
Abrasive resistance(750g/500r)	GB/T 1768-2006	≤30mg

Application paramether：
ratio：
A：B：thinner＝1：1(by weight, please stir well before use)
Pot life：

Temperature(℃）	5	10	20	30
Pot life(hrs)	2	1.5	1	0.5

Condition：

Environment temperature： 5℃---30℃， Environment moisture：≤85%

Substrate temperature： 3℃ higher than air dew pint

Cleaning agent/Thinner：Standard Polyaspartic thinner

Noted：Prior to apply by airless spary, brush or roller, please consult our engineer.

Drying time ：

temperature	5	10	20	30
Touch dry (hrs)	4	3.5	3	2
Hard dry (hrs)	14	12	10	8

Above data just for your reference, the actual drying time depends on film thickness, ventilation, humidity, primer, mechanical strength etc.

Surface treatment：

l Get rid of salt and other water-soluble contaminant with clean water

l remove grease with approperiate detergent

l ensure the surface being clean and dry before application

l pay attention to the recoating window

Storage：

Shelf life： Component A：1 year  Component B：1 year

Storage temperature： 0℃－30℃

Package：

Component A：15KG or 5KG  Component B：15KG or 5KG