Polyaspartic Water Park Elastic Varnish
It is composed of polyaspartic acid ester resin, various additives, a small amount of solvent, isocyanate curing agent, etc.
Description:
It is composed of polyaspartic acid ester resin, various additives, a small amount of solvent, isocyanate curing agent, etc.
All raw materials are produced by own. Component C is added to the anti-skid varnish according to the ratio provided.
Features and benefits:
● Good adhesion with polyurea.
● Excellent resistance to disinfectant water
● Simple construction and quick drying.
● Excellent weather resistance and skid resistance.
Design purpose: Mainly used for water park system waterproof coating, with good protective effect.
Typical physical and chemical properties:
|
Color |
colorless clear liquid |
|
Weight Solid |
55%-60% |
|
Flash point |
30±2℃ |
|
Viscosity |
1000±200CPS(25℃，two component mixing） |
|
Proportion |
1.0±0.1g/cm3（Mixing） |
|
Luster |
－ |
|
Coating thickness |
Dry Film：60-80μm Wet film：80－120μm |
|
Theoretical coating rate
|
Theoretical value:8㎡/Kg/80μm Actual value: Varies according to various factors such as surface treatment, external environment, construction method, etc. |
Construction parameters:
Ratio：
Scrape + roll：B: A: Thinner = 1:0.5:0.2-0.3 (no anti-slip effect)
Scrape + roll：B: A: C: Thinner = 20:10:1.2 (anti-slip effect type)
Coating available time：
|
Temperature(℃） |
5 |
10 |
20 |
25 |
|
Mixing(hrs) |
90~110 |
70~90 |
50~60 |
40~50 |
Construction conditions:-15 ℃ ---30 ℃, humidity: ≤ 85%
Substrate temperature: must be greater than the air dew point temperature above 3 ℃.
Cleaning agent: Polyurea standard thinner
Drying time and coating interval:
|
Temperature (℃) |
－5 |
5 |
10 |
20 |
30 |
|
Touch dry(hrs) |
4 |
2.5 |
2 |
1.5 |
1 |
|
Hard dry (hrs) |
24 |
12 |
10 |
8 |
6 |
|
Coating interval (hrs) |
48 |
24 |
20 |
16 |
12 |
The above data are for guidance only. Actual drying time / time interval before coating can be long or short, depending on film thickness, ventilation, humidity, lower paint, preloading requirements and mechanical strength.
Surface treatment:
1,Rinse with salt water and other water-soluble dirt
2,Remove grease with a suitable detergent and degreaser
3,Make sure the surface is clean and dry before construction
4,Note the distance between the coating and the Primer
Store:
Storage time: Paint(B): 1 year Curing agent(A): 9 months
Storage temperature: 0 ℃ -30 ℃
Packing:Paint: 20KG Curing agent: 20KG
