Polyaspartic Water Park Elastic Anti-slip Topcoat
It is composed of polyaspartic acid ester resin, various pigments and fillers, auxiliaries, isocyanate curing agent, etc.
Description:
It is composed of polyaspartic acid ester resin, various pigments and fillers, auxiliaries, isocyanate curing agent, etc. The main components used are aspartic acid ester resin, pigments and fillers, auxiliaries, isocyanate curing agent, etc.
Raw materials are produced by own. Component C is added to the anti-skid finish according to the ratio provided.
Features and benefits:
● Good adhesion with polyurea.
● Excellent resistance to disinfectant water
● Simple construction and quick drying.
● Excellent weather resistance and skid resistance.
Design purpose: It is mainly used for anti-skid finish of water park system with good decorative effect.
Typical physical and chemical properties:
|
Color |
According to customers’ requirement |
|
Weight Solid ： |
60%-78% |
|
Flash point: |
30±2℃ |
|
Viscosity： |
1000±200CPS(25℃，Two component mixing） |
|
Proportion： |
1.0±0.1g/cm3（mixing） |
|
Luster： |
－ |
|
Coating thickness： |
Dry Film：100-150μm Wet film：140－210μm |
|
Theoretical coating rate：
|
Theoretical value：4㎡/Kg/150μm Actual value: Varies according to various factors such as surface treatment, external environment, construction method, etc. |
Construction parameters:
Ratio：
Scrape + roll：B: A: thinner = 1:0.5:0.2-0.3 (no anti-slip effect)
Scrape + roll：B: A: C: thinner = 20:10:1.2 (anti-slip effect type)
Coating available time：
|
Temperature(℃） |
5 |
10 |
20 |
25 |
|
Mixing(hrs) |
90~110 |
70~90 |
50~60 |
40~50 |
Construction conditions:-15 ℃ ---30 ℃, humidity: ≤ 85%
Substrate temperature: must be greater than the air dew point temperature above 3 ℃.
Cleaning agent: Polyurea standard thinner
Drying time and coating interval:
|
Temperature (℃) |
－5 |
5 |
10 |
20 |
30 |
|
Touch dry(hrs) |
4 |
2.5 |
2 |
1.5 |
1 |
|
Hard dry (hrs) |
24 |
12 |
10 |
8 |
6 |
|
Coating interval (hrs) |
48 |
24 |
20 |
16 |
12 |
The above data are for guidance only. Actual drying time / time interval before coating can be long or short, depending on film thickness, ventilation, humidity, lower paint, preloading requirements and mechanical strength.
Coating Painting System：
Application:epoxy penetrating primer, polyurea coating, or refer to our company's recommendation.
Surface treatment:
1,Rinse with salt water and other water-soluble dirt
2,Remove grease with a suitable detergent and degreaser
3,Make sure the surface is clean and dry before construction
4,Note the distance between the coating and the primer
Store:
Storage time: Paint(B): 1 year Curing agent(A): 9 months
Storage temperature: 0 ℃ -30 ℃
Packing:Paint: 20KG Curing agent: 20KG
