lilylu@huisins.com     86-13922763266
  • Solvent free two-component flexible Polyurea elastomer joint filler
Solvent free two-component flexible Polyurea elastomer joint filler

Solvent free two-component flexible Polyurea elastomer joint filler

  • Product Item : ST910
  • Category: Primer & Sealant
  • ST910 is a solvent-free, two-component, 100% solid flexible polyurea elastomer. With a 1:1 mixing ratio by volume, it cures at temperatures from -28°C to 54°C, offers tack-free time in just 2-5 minutes, and allows return to vehicle and foot traffic within 30 minutes after application. It is an ideal high-performance material for concrete crack and joint repair.
  • TDS INQUIRY   EMAIL

Description

ST910 is a Solvent-free, two-component 100% solid content flexible polyurea elastomer product. The mixing ratio is 1:1 by volume, it can cure under the environment temperature of -28℃ to 54℃, the tack-free time is 2-5 min, it can return to site service of vehicle running and people work in half an hour after application, it is a high quality material for concrete crack and joint repair.

Product features and advantages

(1) High solids, low VOC, safe and environmentally friendly

(2) Easy to apply, fast cure and favourable to apply on vertical surface

(3) Good adhesive strength with substrate, flat surface and no bubbles occur, it can apply on humid substrate High abrasion resistance and impact resistance

(4) Excellent waterproof performance

(5) Excellent resistance to chemical medium, it can resist certain concentration of acid, alkali, salt, oil and organic solvents

(6) Wide application temperature, it can be applied under temperature of -50℃~120℃ .

Application scope:Repair of various concrete cracks.

Products information

Item

Result

Appearance

Color adjustable

Specific gravity

1.02-1.1

Solid content%

97

Tack-Free Timemin

2-5

Pot life (min)

0.5

Theoretical coverage

1.1kg/ film thickness:1mm

Physical properties

Item

Test standard

Result

Hardness (Shore A)

ASTM D-2240

75A

Elongation at Break%

ASTM D-412

400%

Tensile strengthMPa

ASTM D-412

6.0MPa

Adhesive strengthMPaconcrete base

HG/T 3831-2006

2.5MPa

Product application temperature

Environment temperature: -28 --54℃

Relative humidity: 35-85%

Application guide

Recommended coating method: Use manual (hand-operated) cartridege guns or an ElectroFlow-type dispensing system to extrude the two-component material through 

static mixing tubes.

Application note

1.Shake cartridge prior to application and each time it is used for a minimum of 1 minute. Use static mixing tubes to extrude the material,

do not allow mixed material to reside in static mixing head or mixer for more than 30 seconds or nozzle blockage may result.

2.Discard a small amount of product prior to application. Ratio may be slightly off when initial product travels through static mixer. Once uniform mixture is observed, product is ready for application.

3.It can be applied on damp substrate, the product will be even and no bubbles occur, but the adhesive strength will fall down.

Shelf life:

storage temperature+5-35°C

shelf life: 12 months (sealed)

store in cool and ventilated place, avoid direct sunshine exposure and heat source.

package: 600ml bottles

CONTACT US

Name: Lily Lu

Mobile:86-13922763266

Tel:86-20-38993165

Whatsapp:8613922763266

Email:lilylu@huisins.com

Add:Room 206,Building 21,LongTeng Xing Cheng,No.68 LongTeng South Road, DongXiao Town, XinLuo District,LongYan City,FuJian Province.China